<li id="whi0h"></li>

  • <form id="whi0h"><tr id="whi0h"></tr></form>

    <nav id="whi0h"><center id="whi0h"></center></nav>
  • <th id="whi0h"></th>
    <dd id="whi0h"></dd>
    <span id="whi0h"></span>
  • <li id="whi0h"><acronym id="whi0h"><cite id="whi0h"></cite></acronym></li>

        1. 網站首頁新聞動態產品中心公司資質關于我們合作伙伴
          首頁產品中心DJM產品  
          陶瓷復合襯板/溜槽
          來源: 點擊數:5194次 更新時間:2020-5-14 16:00:13
          詳細簡紹:
          陶瓷復合鑄造襯板(MMC-襯板),廣泛應用于球磨機、立式磨機(VRM)、自磨機/半自磨機、破碎機、溜槽、儲料倉等設備耐磨部位。高鉻陶瓷復合鑄造襯板(MMC-Cr-襯板)具有高硬度,高耐磨性高鉻復合鑄造輥套及襯板的平均磨損深度為每1000小時2-3mm(高鉻襯板每1000小時10-15mm);高耐磨性高鉻復合鑄造導向板的平均磨損深度為每1000小時小于1mm;高耐磨性高鉻復合鑄造溜槽襯板的平均磨損深度為每1000小時10mm(高鉻襯板每1000小時25-30mm)。
          馬氏體鋼基陶瓷復合鑄造襯板(MMC-M-襯板),MMC-M-襯板可焊接加工..耐磨板具有很好的焊接性能,同時承受較高的沖擊.
          MMC liner for Ball mill, Vertical mill (VRM), AG/SAG, Crusher, Chute, storage bin.
          1, High Cr cast iron matrix ceramic composite casting liner ( MMC-Cr-Liner) ,
          the MMC-Cr liner has high hardness, high wear resistance
          The average wear depth of the high-chromium composite casting roll sleeve and liner is 2-3mm per 1000 hours
          (high-chromium roller and liner is 10-15mm per 1000 hours)
          The average wear depth of the high-chromium composite casting Chute liner is 10mm per 1000 hours
          (high-chromium Chute liner is 25-30mm per 1000 hours)
          2, Martensite steel matrix ceramic composite casting liner ( MMC-M-Liner) ,
          The MMC-M liner can be welded and machining.
          The wear-resistant  plate has very good welding performance while bearing high impact.
          【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
          上一篇:高錳鋼陶瓷復合鄂破齒板 下一篇:馬氏體鋼/高錳鋼陶瓷板錘
            友情鏈接:   DJM-CASTING & FORGING  |  波紋補償器 |  bjjm-bj |  sauter-cn
          環球破碎機網淘寶動態評分SCR脫銷蓄熱式焚燒爐叉車尾氣凈化
          高鉻陶瓷復合_陶瓷復合鑄造_高錳鋼陶瓷復合 - 北京金煤創業科技股份有限公司 2016-2020 @ All Rights Reserved 京ICP備16053533號-1
          郵件:info@djm-bj.com 聯系電話:010-88909291  地址:北京市石景山區古盛路36院1號樓14層1403
          真人作爱试看50分钟3分钟
          <li id="whi0h"></li>

        2. <form id="whi0h"><tr id="whi0h"></tr></form>

          <nav id="whi0h"><center id="whi0h"></center></nav>
        3. <th id="whi0h"></th>
          <dd id="whi0h"></dd>
          <span id="whi0h"></span>
        4. <li id="whi0h"><acronym id="whi0h"><cite id="whi0h"></cite></acronym></li>